Laboratory machines
- Laboratory plodder LVE 45 Special
SELA laboratory machines type L are offered for processing batches of 1.5 to 3.0 kg. The following single machines can be supplied:
- chipping machines
- mixing machines
- kneading machines
- roller mills
- Single worm plodders
- Twin worms plodders
- Duplex vacuum plodders
- cutters
- manual stamping machines
- Laboratory Table Plant for a Batch of 1.5 kg
All machines can also be delivered with infinitely variable drive, on request. Laboratory Table Plant for a Batch of 1.5 kg Laboratory Combination Roller mills of types W3K are suitable for continuous operation due to cooling of rolls. Plodder E45 is to be used for smallest quantities of ab. 250 g while the construction Z50 is suitable also for very viscous masses.
- Laboratory Combination
Plodders Z75 and E110 allow the manufacture of bars with bigger diameter. By means of the Duplex vacuum plodders DVE75 and DVE 110 additional evacution and refining are possible.
SELA-Laboratory Machines / Technical Data
| Machine / Type | Technical Data | ||||
| Chipping mach. | |||||
| max. bar cross-section | |||||
| LSH | 40 x 40 mm | ||||
| Mixer | |||||
| Batch Capacity kg | Trough volume l | ||||
| LTM 1,5 | 1,5 | 6,0 | |||
| LTM 3,0 | 3,0 | 12,0 | |||
| LTM 5,0 | 5,0 | 26,0 | |||
| LTM 10,0 | 10,0 | 45,0 | |||
| LTM 15 | 15,0 | 70,0 | |||
| Kneader | |||||
| LTK 1,5 | 1,5 | 5,0 | |||
| LTK 3,0 | 3,0 | 10,0 | |||
| Roll Mills | |||||
| Rolls | Cooling | ||||
| Ø mm | Length mm | Number | |||
| LW 3 - 17 | 80 | 170 | 3 | without | |
| LW 3 - 22 | 110 | 220 | |||
| W3K - 22 | 110 | 220 | with | ||
| W3K - 32 | 110 | 320 | |||
| Plodder (one stage) | |||||
| Worm Number | Worm diameter mm | ||||
| VE 45 | 1 | 45 | |||
| LVE 60 | 1 | 60 | |||
| LVE 75 | 1 | 75 | |||
| VZ 50 | 2 | 50 | |||
| VZ 75 | 2 | 75 | |||
| VE 110 | 1 | 110 | |||
| Duplex-Vacuum Plodders | |||||
| LDVE 75 | 1 each stage | 75 | table version | ||
| DVE 75 | 1 each stage | 75 | |||
| DVE 110 | 1 each stage | 110 | |||
| Cutter | |||||
| Cutting length and cross-section | |||||
| LS | optional | ||||
| Presses | |||||
| max. tablet wight g | |||||
| LP 1 | 20 | ||||
| LP 2 | 60 | ||||
| LP 3 | 150 | Compressed air operation | |||
| LP 4 | 150 | Compressed air operation | |||
All laboratory machines type L can be flanged individually or by pairs to a uniform drive unit which is constructed as machine column with bottom flange and allows the following combinations:
- individual drive of one machine by gear motor
- simultaneous drive of two machines by one gear motor; if required, two different speeds by pole changing
- drive of two units by one gear motor.
Laboratory machines can be delivered with drive unit mounted on a laboratory table.
- Laboratory