Cooling
- Cooling channel DTC
For the manufacture of toilet soaps of normal composition it is not necessary to use a cooling channel. If the surface of soap billets is too soft for further processing - because of high water content of laundry soap or special fatty additions or high share of perfume and other ingredients of toilet soap - an additional solidification by cooling is recommendable.
- Cooling channel, bar inlet
SELA cooling channels are built with conveyor belt lengths up to 295 m. Soap billets of usual sizes having left the cutter in single-row are arranged to double-row and enter then the cooling channel. In case of big tablet dimensions, single-row passage is possible. Normally, the required transit time is about 10 to 15 minutes.
| Z | = | transit time (min.) | ||||
| Lg | = | belt length (mm) | ||||
| K Lg | T | = | division (length of billet | |||
| Z | = | ––––– | + distance between billets) | |||
| T · S | (mm) | |||||
| S | = | billets per minute (min-1) | ||||
| K | = | 1 for Simplex belt (single-row) | ||||
| 2 for Duplex belt (double-row) |
SELA-Cooling channel
| Type | Belt length m | Drive Motor kW | Overall dimensions L x W x H m |
| DTC 37 | 37 | 3.3 | 6.12 x 1.9 x 2.5 |
| DTC 69 | 69 | 4.0 | 6.12 x 1.9 x 3.0 |
| DTC 101 | 101 | 6.0 | 6.12 x 1.9 x 3.5 |
| DTC 133 | 133 | 7.5 | 6.12 x 1.9 x 4.0 |
| DTC 165 | 165 | 10.5 | 6.12 x 1.9 x 4.3 |
| DTC 197 | 197 | 10.5 | 6.12 x 1.9 x 4.7 |
| DTC 246 | 246 | 14.0 | 7.10 x 1.9 x 4.9 |
| DTC 295 | 295 | 15.0 | 8.10 x 1.9 x 4.9 |